Strip Pack Foil
............................................................................................................................................................................................................................................
RAVIRAJ FOILS LTD. Manufactures a range of soft Aluminium Foils suitable for strip packaging of Pharmaceutical products such as Tablet, Capsules, etc. With the following general specifications. The final product specifications are made as per agreed contract with the customers. Foil Material Soft fully annealed aluminium alloy AA 8011 / AA 1200 conforming to Aluminium Association specification.
SEALANT Colourless LDPE conforming to the applicable Government regulations regarding direct contact with medicines and drugs.
|
Product Range ---------------------------------------
|
|||||||||||||||||||||||||||||||
| Density Of LDPE | 0.917 g/cc | Identification : | Each reel shall be identified with a sticker with Reel number, Specification, Net weight, Gross weight, Operator name & Date manufacture. | ||||||
| Peel Strength Of Lamination |
200 g/15 mm min. | Packing : | Pharma foils are packed in cardboard carton. Relevant makings are provided on each outer Package. | ||||||
| Seal Strength Bet. Top & Bottom Foil | 450 g/15 mm min. | Recommended operating conditions: |
Sealing temperature : 130 to 150 deg. C Sealing pressure: 2.8 to 5.6 kg/Sq. cm, 40 to 80 lbs/Sq. inch Dwell time : 0.25 to 0.5 sec. |
||||||
| Printing & Lacquer Coating |
Printed as per text, layout and approved by the Customer. For non-printed specification, clear Lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time. |
Covering area of |
Gauge & Temper Foil 0.025 (soft) 0.03 (soft) 0.04 (soft) |
Covering area in sq. mts/kg with 150 Gauge Polyethylene lamination 9.78 8.64 7.00 |
|||||
| Configuration : | Printed and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll. | Table Showing Thickness Tolerance of Foil: | Thickness mm | GSM | |||||
| Winding Direction | Generally, printed or clear lacquer side is out in the finished reel. | Foil gauge | Min. (-8%) |
Nominal | Max. (+8%) |
Min. (-8%) |
Nominal | Max. (+8%) |
|
| Core | Material options (a) Plastic (b) Aluminium (c) Card Board CORE ID: 76 mm +/- 0.5 mm. The length of the core is equal to the width of the web. |
0.025 mm | 0.023 | 0.025 | 0.027 | 62.33 | 67.75 | 73.17 | |
| Splices | Butt type made with 25 mm pressure sensitive tape. | 0.03 mm | 0.028 | 0.030 | 0.032 | 74.80 | 81.30 | 87.80 | |
| 0.04 mm | 0.037 | 0.040 | 0.043 | 99.73 | 108.4 | 117.07 | |||
| Reel Outer Diameter | 250 +/- 10 mm for slit material. 400 +/- 10 for Jumbos. | Thickness Tolerance of Polyethylene |
Thickness mm | GSM | |||||
| Reel Wander | Within +/- 1 mm | Foil gauge | Min. (-15%) |
Nominal | Max. (+15%) |
Min. (-15%) |
Nominal | Max. (+15%) |
|
| Reel / Web Width | Plain : 45 mm to 800 mm with a tolerance of +/- 0.5 mm. Printed: 45 mm to 600 mm with a tolerance of +/- 0.5 mm. |
150 | 0.0319 | 0.0375 | 0.0431 | 29.23 | 34.39 | 39.55 | |
| Joints Per Reel | Maximum 2. Average less than 1. | 180 | 0.0383 | 0.045 | 0.0518 | 35.08 | 41.27 | 47.46 | |
| 200 | 0.0425 | 0.05 | 0.0575 | 38.97 | 45.85 | 52.73 | |||
| Pin Holes | Nil. | Test Certificates: |
Test certificates giving the actual observed values of different parameters will accompany the supplies | ||||||
| All Rights Reserved with #1 Vinayak InfoSoft (Terms of Use):: Terms & Condition | Owned & Powered by : #1 Vinayak InfoSoft - #1 Web Designing :: Web Design Outsourcing Company |